Kelsey Wolf-Cloud, Author at Wind Harvest

Soga Generator Arrives. Yay!

By Kelsey Wolf-Cloud|2021-09-29T14:02:43+00:00September 20, 2021|Wind Harvester 3.1|

With the tremendous help of Soga Energy in Italy, [...]

Comments Off

Drive Shaft and Bearing Installation

By Kelsey Wolf-Cloud|2022-01-03T04:09:33+00:00September 9, 2021|Wind Harvester 3.1|

Cantilevering Model 3.1’s 170 square meter rotor (1830 sq. [...]

Comments Off

Data collection for aeroelastic model validation

By Kelsey Wolf-Cloud|2021-09-29T13:41:47+00:00September 7, 2021|Wind Harvester 3.1|

Our Model 3.1 will collect an enormous amount of [...]

Comments Off

Lower Blades Installed. August Break at UL.

By Kelsey Wolf-Cloud|2021-09-29T13:20:44+00:00August 20, 2021|Wind Harvester 3.1|

Our principals on-site at the UL Advanced Wind Turbine Testing [...]

Comments Off

Blade Arms Installed

By Kelsey Wolf-Cloud|2021-09-29T12:47:07+00:00August 19, 2021|Wind Harvester 3.1|

The simplicity of the blade arms makes them inexpensive. [...]

Comments Off

Central mast raised

By Kelsey Wolf-Cloud|2021-08-23T12:22:48+00:00August 18, 2021|Wind Harvester 3.1|

Model 3.1 has a three part central mast made from [...]

Comments Off

Drive Shaft Installed

By Kelsey Wolf-Cloud|2021-08-20T15:57:12+00:00August 17, 2021|Wind Harvester 3.1|

With the top plate and housings for its upper and [...]

Comments Off

Lattice Tower Installation Begins

By Kelsey Wolf-Cloud|2021-09-29T12:16:23+00:00August 14, 2021|Wind Harvester 3.1|

Here you can see the generator base plate being placed [...]

Comments Off

Fiberglass aluminum cables ready to roll

By Kelsey Wolf-Cloud|2021-08-19T15:32:45+00:00July 22, 2021|Wind Harvester 3.1|

2000 feet of 11kV aluminum electrical wire from Duke Electric [...]

Comments Off

Model 3.1 Control Panel ready for the next step!

By Kelsey Wolf-Cloud|2021-08-09T12:50:15+00:00July 14, 2021|Wind Harvester 3.1|

Charlie Persson hands off his hand-made control panel to its [...]

Comments Off

About Kelsey Wolf-Cloud