Wind Harvester 3.1 Archives - Page 3 of 5

Frequency Response Static Test is a Success

By Kelsey Wolf-Cloud|2021-10-11T16:14:36+00:00September 29, 2021|Wind Harvester 3.1|

Not knowing where the RPM of the rotor overlaps [...]

Comments Off

Control Panels Arrive from Pennsylvania

By Kelsey Wolf-Cloud|2022-01-03T04:06:43+00:00September 24, 2021|Wind Harvester 3.1|

Dan Clunies with Windurance drove our Model 3.1 control [...]

Comments Off

Generator Installed

By Kelsey Wolf-Cloud|2021-10-07T19:32:54+00:00September 22, 2021|Wind Harvester 3.1|

It took ingenuity and solid engineering skills to adapt [...]

Comments Off

Rotor Finished. All blades on.

By Kelsey Wolf-Cloud|2021-10-07T19:37:04+00:00September 20, 2021|Wind Harvester 3.1|

The team from Wanzek Construction completed the installation of [...]

Comments Off

Soga Generator Arrives. Yay!

By Kelsey Wolf-Cloud|2021-09-29T14:02:43+00:00September 20, 2021|Wind Harvester 3.1|

With the tremendous help of Soga Energy in Italy, [...]

Comments Off

Drive Shaft and Bearing Installation

By Kelsey Wolf-Cloud|2022-01-03T04:09:33+00:00September 9, 2021|Wind Harvester 3.1|

Cantilevering Model 3.1’s 170 square meter rotor (1830 sq. [...]

Comments Off

Data collection for aeroelastic model validation

By Kelsey Wolf-Cloud|2021-09-29T13:41:47+00:00September 7, 2021|Wind Harvester 3.1|

Our Model 3.1 will collect an enormous amount of [...]

Comments Off

Lower Blades Installed. August Break at UL.

By Kelsey Wolf-Cloud|2021-09-29T13:20:44+00:00August 20, 2021|Wind Harvester 3.1|

Our principals on-site at the UL Advanced Wind Turbine Testing [...]

Comments Off

Blade Arms Installed

By Kelsey Wolf-Cloud|2021-09-29T12:47:07+00:00August 19, 2021|Wind Harvester 3.1|

The simplicity of the blade arms makes them inexpensive. [...]

Comments Off

Central mast raised

By Kelsey Wolf-Cloud|2021-08-23T12:22:48+00:00August 18, 2021|Wind Harvester 3.1|

Model 3.1 has a three part central mast made from [...]

Comments Off