Wind Harvester 3.1 Archives - Page 4 of 5

Drive Shaft Installed

By Kelsey Wolf-Cloud|2021-08-20T15:57:12+00:00August 17, 2021|Wind Harvester 3.1|

With the top plate and housings for its upper and [...]

Comments Off

Lattice Tower Installation Begins

By Kelsey Wolf-Cloud|2021-09-29T12:16:23+00:00August 14, 2021|Wind Harvester 3.1|

Here you can see the generator base plate being placed [...]

Comments Off

Fiberglass aluminum cables ready to roll

By Kelsey Wolf-Cloud|2021-08-19T15:32:45+00:00July 22, 2021|Wind Harvester 3.1|

2000 feet of 11kV aluminum electrical wire from Duke Electric [...]

Comments Off

Model 3.1 Control Panel ready for the next step!

By Kelsey Wolf-Cloud|2021-08-09T12:50:15+00:00July 14, 2021|Wind Harvester 3.1|

Charlie Persson hands off his hand-made control panel to its [...]

Comments Off

Installing Strain Gauges to collect data!

By Kelsey Wolf-Cloud|2022-01-03T04:12:43+00:00July 12, 2021|Wind Harvester 3.1|

Antonio Ojeda and one of our new interns, Omar Garcia, [...]

Comments Off

Model 3.1 foundation poured!

By Kelsey Wolf-Cloud|2021-08-19T14:21:01+00:00June 30, 2021|Wind Harvester 3.1|

Coinciding with the arrival of our turbine package at [...]

Comments Off

Turbine Package Arrives. A peek inside

By Kelsey Wolf-Cloud|2021-06-30T12:13:28+00:00June 18, 2021|Wind Harvester 3.1|

Welcome to Texas! After delays (due in part to severe [...]

Comments Off

Transformer Awaiting Arrival of Model 3.1 Turbine

By Kelsey Wolf-Cloud|2021-06-30T12:18:55+00:00June 14, 2021|Wind Harvester 3.1|

The transformer arrived in Texas. Antonio Ojeda and Jeff Willis [...]

Comments Off

Transition fairings arrive

By Kelsey Wolf-Cloud|2021-06-30T12:21:11+00:00June 10, 2021|Wind Harvester 3.1|

While there have been some delays in getting equipment to [...]

Comments Off

Wind Harvester Model 3.1 Installation Progress

By Kelsey Wolf-Cloud|2021-10-07T19:56:56+00:00May 14, 2021|Wind Harvester 3.1|

A lot is happening here at Wind Harvest. First, our [...]

Comments Off